Other Parts

The Blade Root kit consists of a set of three blade root 0.8 mm G10/FR4 reinforcement parts. The Blade Root Kit is designed to reinforce the Rotor Root of lightweight Autogyro blades as used on the Crane Fly Lite and other lightweight models. The G10/FR4 parts prevent damage to the wooden blades by the...

A set of General Purpose Blade Root strengthening parts made from 0.8mm glassfibre sheet and two Mast doublers to bring a 6mm (1/4 inch) spruce mast upto approx 8mm thickness to match the Razor Head dimensions. Typical models would be Burky II, Revolver, Gyroo, Firefly, Whippit etc Not Suitable for wide...

Lipo Battery charging bag 18x22 cm This high quality Lipo charge bag provides extra protection in the event of fire. It provides ample space to store up to 3 2200mAh sized Lipo batteries and features a strong velcro style seal and double stitched seams. 18 cm x 22 cm Silver Coloured Charge Bag Inadvertently...

A 2.4mm Glass fibre plate as designed by Jockadopolus for his pre-rotator conversion of the HK C30 head. The design and build is discussed in his RCGroups thread here . The design has been manufactured with the kind permission of Jockadopolus. Material: 2.4mm G10 Glass fibre sheet QTY: 1...

The ideal washers to spread the Rotor bolt forces across the blade holders on your Autogyro. The 3mm x 12mm are as specified on the Crane Fly Series of Autogyros, but can be used on other designs using a 3mm Rotor Bolt. Number: 10 per packet Material: Steel Hole Size: 3mm or 4mm Diameter: 12mm or 14mm...